Overview
The 8E1 PDH Optical Multiplexer with 4FE (CLI & SNMP Managed) is a managed point-to-point optical transmission device built on proprietary VLSI ASIC architecture. Housed in a standard 19-inch 1U rack-mount chassis, it transmits 8 E1 interfaces, 4 wire-speed 10/100M Fast Ethernet switch ports (supporting IEEE 802.1Q VLAN division), and 2 expansion interfaces for asynchronous data channels (RS232/RS485/RS422) over a single optical link. Equipped with comprehensive network management capabilities supporting local CLI (Console) and optional remote SNMP management, an optional engineering order-wire telephone hotline, low power consumption, and flexible AC/DC power options, it delivers exceptionally reliable performance for enterprise and telecom infrastructure.
Features
- Proprietary ASIC Architecture: Engineered on self-copyright IC technology for maximum system reliability, compact integration, and low power consumption.
- Modular Wide Dynamic Optical Receiver: Features a modular wide dynamic range optical detector, ensuring superior optical line sensitivity and link stability.
- Auto-Negotiating Switched Fast Ethernet: 4-port Fast Ethernet switch interface supports 10/100M auto-negotiation, half/full duplex modes, 100M wire-speed throughput, and IEEE 802.1Q VLAN tag management.
- E1 Compliance & Smooth Clock Recovery: 8 E1 interfaces strictly comply with ITU-T G.703 and incorporate digital clock recovery and smooth phase-locked loop (PLL) technology.
- Comprehensive Network Management (CLI & SNMP): Supports local CLI Console management and optional SNMP network management for centralized remote monitoring and configuration.
- Engineering Order-Wire Telephone Hotline: Supports standard 2-wire telephone set (non-telephone handles) as an optional engineering order-wire hotline channel.
- 2 Versatile Expansion Data Slots: Provides 2 expansion slots configured for RS232, RS485, or RS422 asynchronous data transmission.
- Optical Signal Loss Alarm & Remote Detection: Detects remote equipment power loss or optical fiber disconnection upon LOS alarm, indicating status in real time via front-panel LED indicators.
- Remote Status Monitoring: Allows real-time monitoring and reporting of remote equipment operational status from the local terminal.
- Remote Loopback Command Diagnostics: Supports remote interface loopback commands to simplify field troubleshooting and line maintenance.
- Extended Relay-Free Reach: Relay-free optical transmission distance ranges up to 2 km ~ 120 km.
- Flexible AC/DC Power Supply Options & Polarity-Free: Supports AC 220V, DC -48V, or DC +24V power input; DC power input features automatic polarity detection (Polarity-Free).
Parameters
◆ Optical Interface
| Optical Configuration | Single Optical Port (1* FC/SC/ST Fiber Port) |
| Detector Type | Modular Wide Dynamic Range Optical Receiver |
| Multi-Mode Fiber Specifications | • Fiber Core: 50/125µm, 62.5/125µm • Max Transmission Distance: 5 km @ 62.5/125µm single-mode fiber (Attenuation: 3dBm/km) • Wavelength: 820nm • Transmitting Power: -12dBm (Min) ~ -9dBm (Max) • Receiver Sensitivity: -28dBm (Min) • Link Budget: 16dBm |
| Single-Mode Fiber Specifications | • Fiber Core: 8/125µm, 9/125µm • Max Transmission Distance: 40 km @ 9/125µm single-mode fiber (Attenuation: 0.35dBm/km) • Transmission Reach: 20 km ~ 120 km • Wavelength: 1310nm / 1550nm • Transmitting Power: -9dBm (Min) ~ -8dBm (Max) • Receiver Sensitivity: -27dBm (Min) • Link Budget: 18dBm |
◆ E1 Interface
| Interface Standard | Complies with protocol ITU-T G.703 |
| Interface Rate | N × 64Kbps ± 50ppm |
| Line Code | HDB3 |
| E1 Impedance | 75 Ω (unbalanced), 120 Ω (balanced) |
| Jitter Tolerance | In accordance with protocol G.742 and G.823 |
| Allowed Attenuation | 0 ~ 6 dBm |
◆ Fast Ethernet Interface (10/100M Switched)
| Interface Rate | 10/100 Mbps, half/full duplex auto-negotiation (100M wire speed) |
| Interface Standard | Compatible with IEEE 802.3, IEEE 802.1Q (VLAN) |
| MAC Address Capability | 4096 MAC Addresses |
| Connector | RJ45, supports Auto-MDIX |
◆ Expansion Interfaces & Management
| Expansion Slots | 2 Slots, supporting RS232 / RS485 / RS422 asynchronous data transmission |
| Order-Wire Phone | 1 Engineering Order-Wire Phone Interface (Optional standard 2-wire hotline) |
| Management Interface | 1 × RS232 Console (CLI) Interface, SNMP Network Management (Optional) |
◆ Working Environment
| Working Temperature | -10°C ~ 50°C |
| Working Humidity | 5% ~ 95% (non-condensing) |
| Storage Temperature | -40°C ~ 80°C |
| Storage Humidity | 5% ~ 95% (non-condensing) |
Specifications
| Model Number | KDSP-E8F4 |
| Functional Description | 8E1 + 4FE PDH Optical Multiplexer with CLI & SNMP Management, 19-inch 1U Rack-mount, Order-Wire Telephone Interface |
| Port Description | • 1 Optical Port • 8 E1 Interfaces (75 Ω / 120 Ω) • 4 Fast Ethernet Interfaces (10/100M Switch Ports) • 1 RS232 Console (CLI) Interface (SNMP Optional) • 1 Engineering Order-Wire Telephone Interface • 2 Expansion Asynchronous Data Interfaces (RS232/485/422) |
| Power | Power Supply: AC 180V ~ 260V / DC -48V / DC +24V (Polarity-Free) Power Consumption: ≤ 10 W |
| Dimensions | 19-inch 1U, 483 × 138 × 45 mm (W × D × H) |
| Weight | 2.5 kg |
Application


