Overview
The 4E1 TDM over IP Converter (Desktop) is designed to transmit legacy E1 signals transparently over standard wired or wireless IP/Ethernet networks. Housed in a compact, rugged IP40-rated anodized aluminum desktop enclosure, it allows operators and enterprises to interconnect traditional TDM equipment—such as PBX systems, mobile base stations, SS7 signaling devices, and voicemail systems—over cost-effective packet networks without sacrificing voice quality or timing synchronization. Equipped with 4 E1 service ports, 2 Gigabit Ethernet ports, 1 Gigabit SFP optical port, and dual management interfaces (Console CLI and Web GUI), it delivers high bandwidth utilization, low transmission latency, and carrier-grade reliability.
Features
- High-Performance ARM Cortex-M4 Architecture: Powered by an advanced ARM Cortex-M4 processor operating at a primary frequency of 192 MHz for reliable packet processing.
- Rugged Industrial Enclosure: Encased in an anodized aluminum alloy shell with IP40 protection grade, built to withstand harsh environmental conditions.
- Flexible Interface Configuration: Provides 4 E1 interfaces, 2 Gigabit (10/100/1000M) Ethernet ports, and 1 Gigabit SFP optical port.
- Automatic E1 Impedance Matching: Supports both 75 Ω (unbalanced) and 120 Ω (balanced) E1 impedances natively without requiring manual hardware jumpers or settings.
- Transparent E1 Transmission over IP: Capable of transmitting both framed and unframed E1 (N*64K) signals transparently across IP networks in compliance with ITU-T G.703 standards.
- Advanced Clock Recovery Technology: Employs a unique clock recovery algorithm to ensure stable frequency restoration with minimal jitter and drift, fully complying with G.823/G.824 and G.8261 specifications.
- High Efficiency & Low Latency: Achieves up to 90% bandwidth utilization efficiency with configurable Ethernet packet lengths and jumbo frame support.
- Comprehensive Management (Console & Web GUI): Supports both Console (CLI) and Web-based management interfaces for straightforward installation, activation, and online software/hardware upgrades.
- Diagnostic Loopback & Alarm Monitoring: Supports local and remote E1 loopback functions, local E1 enablement settings, and E1 link loss indication.
- Flexible Power Supply Options: Supports multiple power supply modes including AC 220V, DC -48V, and DC +24V.
Parameters
◆ Ethernet Interface (10/100/1000M)
| Protocols & Standards | IEEE 802.3az, IEEE 802.1Q (VLAN), Jumbo Frames supported |
| Interface Rate | 10/100/1000 Mbps adaptive, full/half duplex fully adaptive |
| MAC Address Table Capacity | 4096 MAC addresses |
| Physical Connector | RJ45 electrical port supporting auto-MDIX |
| Optical Port | 1 × 100/1000M adaptive Ethernet SFP optical port |
◆ E1 Interface
| Interface Standard | Compliant with ITU-T G.703 recommendations |
| Interface Rate | 2048 Kbps ± 50ppm |
| Line Code | HDB3 |
| E1 Impedance | 75 Ω (unbalanced) / 120 Ω (balanced) |
| Jitter Performance | Compliant with G.742 and G.823 recommendations |
| Input Port Attenuation Allowed | 0 ~ 6 dBm |
◆ Management & Processing
| Processor | ARM Cortex-M4 processor (192 MHz primary frequency) |
| Management Interfaces | Console CLI port & Web-based management GUI |
| System Upgrades | Online software and hardware upgrades supported via Web interface |
◆ Environmental & Mechanical Indicators
| Operating Temperature | -10°C ~ +60°C |
| Storage Temperature | -40°C ~ +85°C |
| Working Humidity | 0% ~ 95% (non-condensing) |
| Enclosure & Protection | Anodized aluminum alloy shell, IP40 protection grade |
| MTBF | > 100,000 hours |
Specifications
| Model Number | KDS-E4 |
| Product Name | 4E1 TDM over IP Converter (Desktop) |
| Functional Description | TDMoIP encapsulation device for transmitting 4 E1 interfaces over IP/Ethernet networks with Web and Console network management |
| Port Description | • 4 × E1 Interface (75 Ω / 120 Ω) • 2 × 10/100/1000M Ethernet Ports • 1 × 100/1000M SFP Optical Port • 1 × Console Management Port (CLI) • 1 × Web Management Interface |
| Power Supply | Power Input: AC 180V ~ 260V / DC -48V / DC +24V Power Consumption: ≤ 10 W |
| Dimensions | Desktop Enclosure, 216 × 130 × 31 mm (L × W × H) |
| Weight | 0.85 kg |
Application


