Overview
The 4E1 PDH Optical Multiplexer with 4GE is a carrier-grade point-to-point optical transmission device engineered on high-performance VLSI ASIC technology. Housed in a standard 19-inch 1U rack-mount chassis, it provides 1 to 4 E1 interfaces, 4 wire-speed 10/100/1000M Gigabit Ethernet switch ports (supporting IEEE 802.1Q VLAN division and up to 4-channel logical isolation), and 2 versatile expansion slots for asynchronous data (RS232/RS485/RS422, dry contact signals) or an optional digital order-wire telephone channel. Equipped with dual optical ports for 1+1 Automatic Protection Switching (APS), an internal SNMP management agent, RS232 Console control, and flexible AC/DC power options, it offers high integration, low power consumption, and reliable network transmission.
Features
- Proprietary ASIC Core: Based on self-copyright IC technology for enhanced reliability and compact integration.
- High Fiber Bandwidth & Wire-Speed Gigabit Ethernet: Fiber bandwidth reaches up to 1.5G, and Gigabit Ethernet bandwidth provides full 1000M wire-speed performance.
- Auto-Negotiating Gigabit Ethernet: Ethernet interface rates support 10/100/1000M with half/full duplex auto-negotiation.
- 4-Port Switched Ethernet with VLAN Isolation: The 4 Gigabit Ethernet interfaces operate as switch ports, supporting IEEE 802.1Q VLAN division and configurable 4-channel logical isolation.
- RS232 Console Management Interface: Provides an RS232 Console management interface for straightforward local installation, debugging, and configuration.
- Dual Fiber Optical 1+1 Protection (APS): Provides dual optical interfaces with 1+1 Automatic Protection Switching (APS) to ensure seamless optical redundancy.
- E1 Compliance & Smooth Clock Recovery: E1 interfaces strictly comply with ITU-T G.703 and adopt digital clock recovery and smooth phase-locked loop (PLL) technology.
- Engineering Order-Wire Hotline: Uses standard 2-wire telephone set (non-telephone handles) as an engineering order-wire hotline (optional).
- Optical Signal Loss LED Alarm & Remote Power Detection: When the optical signal is lost, the local unit detects if the remote device is powered down or the fiber is disconnected, displaying real-time alarm status via LED indicators.
- Remote Equipment Status Monitoring: Allows the local device to view and display the real-time operating condition of the remote equipment.
- Versatile 2-Channel Expansion Interfaces: Provides 2 expansion slots to extend 1~2 channels of asynchronous data (such as RS232, RS485, RS422, or Manchester code) and dry contact signals.
- Comprehensive Loopback Diagnostics & E1 Alarms: Supports remote interface loopback commands, local E1 loopback functions, and E1 LOS / AIS alarm detection to simplify line maintenance.
- Extended Relay-Free Transmission Reach: Relay-free optical transmission distance reaches from 2 km up to 100 km.
- Embedded SNMP Network Management: Supports SNMP network management with an integrated internal SNMP agent.
- Flexible Multiple Power Supply Options: Supports AC 220V, DC -48V, or DC +24V power supply configurations.
- Automatic DC Polarity Detection: DC -48V / DC +24V power supply features automatic polarity detection (Polarity-Free), eliminating polarity wiring errors during installation.
Parameters
◆ Optical Interface
| Fiber Bandwidth & Optical Ports | • Fiber Bandwidth: Up to 1.5 Gbps • Optical Ports: Dual Fiber Ports with 1+1 Automatic Protection Switching (APS) |
| Multi-Mode Fiber Specifications | • Fiber Core: 50/125µm, 62.5/125µm • Max Transmission Distance: 5 km @ 62.5/125µm single-mode fiber (Attenuation: 3dBm/km) • Wavelength: 820nm • Transmitting Power: -12dBm (Min) ~ -9dBm (Max) • Receiver Sensitivity: -28dBm (Min) • Link Budget: 16dBm |
| Single-Mode Fiber Specifications | • Fiber Core: 8/125µm, 9/125µm • Max Transmission Distance: 40 km @ 9/125µm single-mode fiber (Attenuation: 0.35dBm/km) • Transmission Reach: 20 km ~ 100 km • Wavelength: 1310nm / 1550nm • Transmitting Power: -9dBm (Min) ~ -8dBm (Max) • Receiver Sensitivity: -27dBm (Min) • Link Budget: 18dBm |
◆ E1 Interface
| Interface Standard | Complies with protocol ITU-T G.703 |
| Interface Rate | N × 64Kbps ± 50ppm |
| Line Code | HDB3 |
| E1 Impedance | 75 Ω (unbalanced), 120 Ω (balanced) |
| Jitter Tolerance | In accordance with protocol G.742 and G.823 |
| Input Allowed Attenuation | 0 ~ 6 dBm |
◆ Gigabit Ethernet Interface (10/100/1000M Switched)
| Interface Rate | 10/100/1000 Mbps, half/full duplex auto-negotiation (1000M wire speed) |
| Interface Standard | Compatible with IEEE 802.3, IEEE 802.1Q (VLAN) |
| Switching & Isolation | 4-port switch interface supporting VLAN division and 4-channel logical isolation |
| MAC Address Table | 4096 MAC Addresses |
| Connector | RJ45, supports Auto-MDIX |
◆ Voice Phone Interface (FXO / FXS)
| FXS Phone Interface | • Ring Voltage: 75V • Ring Frequency: 25Hz • Two-Line Impedance: 600 Ω (off-hook) • Return Loss: 40 dB |
| FXO Switch Interface | • Ring Detect Voltage: 35V • Ring Detect Frequency: 17Hz ~ 60Hz • Two-Line Impedance: 600 Ω (off-hook) • Return Loss: 40 dB |
◆ Expansion Interfaces & Management
| Expansion Slots | 2 Slots, supporting RS232 / RS485 / RS422 / Manchester code asynchronous data and dry contact signals |
| Order-Wire Phone | 1 Engineering Order-Wire Phone Interface (Optional standard 2-wire hotline) |
| Management Interfaces | 1 × RS232 Console Interface, 1 × SNMP Ethernet Management Port (Internal SNMP Agent) |
◆ Working Environment
| Working Temperature | -10°C ~ 60°C |
| Working Humidity | 5% ~ 95% (non-condensing) |
| Storage Temperature | -40°C ~ 85°C |
| Storage Humidity | 5% ~ 95% (non-condensing) |
Specifications
| Model Number | KDSP-48G4 |
| Functional Description | 4E1 + 4GE PDH Optical Multiplexer with Gigabit Ethernet, Order-Wire Phone, 19-inch 1U Rack-mount, Console Management, 1+1 Optical Fiber Protection |
| Port Description | • 2 Optical Ports (1+1 APS Protection) • 4 E1 Interfaces (75 Ω / 120 Ω) • 4 Gigabit Ethernet Interfaces (10/100/1000M Switch Ports) • 1 RS232 Console Management Interface • 1 SNMP Ethernet Management Interface • 1 Engineering Order-Wire Telephone Interface • 2 Expansion Asynchronous Data / Dry Contact Interfaces |
| Power | Power Supply: AC 180V ~ 260V / DC -48V / DC +24V (Polarity-Free) Power Consumption: ≤ 10 W |
| Dimensions | 19-inch 1U, 483 × 138 × 45 mm (W × D × H) |
| Weight | 3.0 kg |
Application


