Overview
The 16E1 PDH Optical Multiplexer with 8FE (1+1 Protection) is a high-density managed point-to-point optical transmission device designed on proprietary VLSI ASIC architecture. Housed in a standard 19-inch 1U rack-mount chassis, it integrates 1 to 16 E1 interfaces, 8 switched 10/100M Fast Ethernet ports (supporting IEEE 802.1Q VLAN division), 1 auxiliary expansion channel (RS232/RS485/RS422 data), a local Console management port, an SNMP management interface, and an engineering order-wire telephone hotline over a dual-fiber 1+1 optical protection link (APS). It offers exceptional transmission stability, low power consumption, and robust carrier-grade link redundancy.
Features
- Proprietary ASIC Architecture: Engineered on self-copyright IC technology for high reliability, compact integration, and low power consumption.
- 1+1 Optical Protection (APS) & ALS Function: Features dual optical interfaces supporting Automatic Protection Switching (APS) for full optical redundancy, along with Automatic Laser Shutdown/Reduction (ALS) for operational safety.
- 8 Switched Fast Ethernet Ports: Equipped with 8 Fast Ethernet (10/100M) switch ports supporting IEEE 802.1Q VLAN division, jumbo frames up to 1916 bytes, independent port settings, and bandwidth control in multiples of 32K.
- Auxiliary Expansion Channel: Provides 1 expansion interface for RS232, RS485, or RS422 asynchronous data transmission.
- E1 Compliance & Smooth Clock Recovery: Supports 1 to 16 E1 interfaces complying strictly with ITU-T G.703, featuring digital clock recovery and smooth phase-locked loop (PLL) technology.
- Comprehensive Network Management (Console & SNMP): Provides an RS232 Console interface for local management and a built-in SNMP agent for remote network monitoring.
- Engineering Order-Wire Telephone Hotline: Supports an optional standard 2-wire telephone set (non-telephone handles) as an engineering order-wire hotline channel.
- Diagnostic Loopback & Alarm Monitoring: Supports remote interface loopback, local E1 loopback, and real-time E1 LOS and AIS alarm detection for simplified line maintenance.
- Optical Signal Loss Alarm & Remote Power-Off Detection: Detects remote equipment power outages or optical link disconnections upon LOS alarm, displaying real-time LED alarm status.
- Extended Relay-Free Reach: Relay-free optical transmission distance ranges up to 2 km ~ 120 km.
- Flexible Power Supply Options & Polarity-Free: Supports AC 220V, DC -48V, or DC +24V power input; DC power input features automatic polarity detection (Polarity-Free).
Parameters
◆ Optical Interface
| Optical Configuration | Dual Optical Ports (1+1 Protection / APS with ALS Function) |
| Detector Type | Modular Wide Dynamic Range Optical Receiver |
| Multi-Mode Fiber Specifications | • Fiber Core: 50/125µm, 62.5/125µm • Max Transmission Distance: 5 km @ 62.5/125µm single-mode fiber (Attenuation: 3dBm/km) • Wavelength: 820nm • Transmitting Power: -12dBm (Min) ~ -9dBm (Max) • Receiver Sensitivity: -28dBm (Min) • Link Budget: 16dBm |
| Single-Mode Fiber Specifications | • Fiber Core: 8/125µm, 9/125µm • Max Transmission Distance: 40 km @ 9/125µm single-mode fiber (Attenuation: 0.35dBm/km) • Transmission Reach: 20 km ~ 120 km • Wavelength: 1310nm / 1550nm • Transmitting Power: -9dBm (Min) ~ -8dBm (Max) • Receiver Sensitivity: -27dBm (Min) • Link Budget: 18dBm |
◆ E1 Interface
| Interface Standard | Complies with protocol ITU-T G.703 |
| Interface Rate | 2048 Kbps ± 50ppm |
| Line Code | HDB3 |
| E1 Impedance | 75 Ω (unbalanced), 120 Ω (balanced) |
| Jitter Tolerance | In accordance with protocol G.742 and G.823 |
| Allowed Attenuation | 0 ~ 6 dBm |
◆ Ethernet Interface (10/100M)
| Electrical FE Ports | 8 × 10/100 Mbps Fast Ethernet Ports, half/full duplex auto-negotiation |
| Interface Standard | Compatible with IEEE 802.3, IEEE 802.1Q (VLAN) |
| Packet & Bandwidth Control | Supports max frame size 1916 bytes; Bandwidth adjustable in multiples of 32K |
| MAC Address Capability | 4096 MAC Addresses |
| Connector | RJ45 (Electrical, Auto-MDIX) |
◆ Auxiliary Data & Management
| Expansion Interface | 1 Auxiliary Channel for RS232 / RS485 / RS422 Asynchronous Data |
| Order-Wire Phone | 1 Engineering Order-Wire Phone Interface (Optional standard 2-wire hotline) |
| Management Interface | 1 × RS232 Console Interface, 1 × SNMP Ethernet Management Port |
◆ Working Environment
| Working Temperature | -10°C ~ 50°C |
| Working Humidity | 5% ~ 95% (non-condensing) |
| Storage Temperature | -40°C ~ 80°C |
| Storage Humidity | 5% ~ 95% (non-condensing) |
Specifications
| Model Number | KDSP-E16F8 |
| Functional Description | 16E1 + 8FE PDH Multiplexer with 1+1 Fiber Protection, 19-inch 1U Rack-mount, Console/SNMP Management, Order-Wire Hotline |
| Port Description | • 1+1 Dual Optical Ports • 16 E1 Interfaces (75 Ω / 120 Ω) • 8 Fast Ethernet Interfaces (10/100M Switch Ports) • 1 Expansion Data Port (RS232/RS485/RS422) • 1 RS232 Console Interface • 1 SNMP Ethernet Management Interface • 1 Engineering Order-Wire Telephone Interface |
| Power | Power Supply: AC 180V ~ 260V / DC -48V / DC +24V (Polarity-Free) Power Consumption: ≤ 10 W |
| Dimensions | 19-inch 1U, 483 × 138 × 45 mm (W × D × H) |
| Weight | 3.0 kg |
Application


