Product Categories

4-Port Serial (RS232 / RS422 / RS485) to E1 Converter

Overview

The 4-Port Serial (RS232 / RS422 / RS485) to E1 Converter (Models: KDS-E1D4 / KDS-E1R4 / KDS-E1Q4) is a compact desktop FPGA-based TDM serial multiplexer engineered to transport 4 independent asynchronous serial channels (RS232, RS422, or RS485, configurable by model/interface option) over a single 2,048 Kbps E1 circuit. Operating in point-to-point pairs at adaptive baud rates from 0 to 57.6 Kbps (57,600 bps), it overcomes traditional serial distance and speed limitations while eliminating electromagnetic interference (EMI), ground-loop potential differences, and lightning surge hazards.

Designed for mission-critical industrial automation, process control, intelligent transportation, banking networks, and electric power substations, the unit integrates 6 kV IEC 61000-4-5 surge protection, a built-in 2M Pseudo-Random Binary Sequence (PRBS) BERT tester, three diagnostic loopback modes, and wide-range polarity-free DC/AC power inputs.

Features

  • Proprietary IC / FPGA Architecture: Built on a self-developed, proprietary IC/FPGA core for high integration, low power consumption, and carrier-grade stability.
  • 3-Wire RS232 & Flow Control Support: Supports standard 3-wire RS232 (TXD, RXD, GND) along with hardware flow control signals (CD, DSR, CTS).
  • Three Diagnostic Loopback Modes: Provides E1 interface loopback (ANA), local serial interface loopback (DIG), and commanded remote serial interface loopback (REM) for rapid fault isolation.
  • Hot-Swappable Serial Ports & DTE/DCE Compatibility: Serial RS232/RS485/RS422 interfaces support hot-plugging and direct interconnection with both DTE and DCE equipment.
  • Adaptive Asynchronous Baud Rate (0 to 57.6 Kbps): Each serial channel transparently transmits asynchronous data at adaptive baud rates from 0 bps up to 57.6 Kbps (57,600 bps).
  • Built-In 2M BER Tester (PRBS): Features an integrated Pseudo-Random Binary Sequence (PRBS) test generator/analyzer for fast line commissioning, enabling the unit to operate as a standalone 2 Mbps Bit Error Rate Tester (BERT).
  • 6 kV Industrial Surge & Lightning Protection: Serial ports comply with IEC 61000-4-5 (8/20 μs) surge immunity standards, offering 6 kV Differential Mode (2 Ω impedance) and 6 kV Common Mode (2 Ω impedance) protection.
  • Dual E1 Impedance Options: Supports both 75 Ω unbalanced coaxial and 120 Ω balanced twisted-pair E1 trunk interfaces.
  • Hybrid E1-to-Fiber Cascaded Topology Support: Supports forming a chained transmission link of E1 Serial Converter (A) — E1 Fiber Optic Modem (B) — Fiber Serial Modem (C) for flexible hybrid copper-fiber deployments.
  • Wide-Range AC/DC Power with Polarity-Free DC Input: Supports AC 180V–260V and multiple DC voltage options (DC -48V, DC +24V, DC 30V, DC 110V) with polarity-free DC wiring protection.

Parameters

◆ E1 Trunk Interface

Interface Standard Compliant with ITU-T G.703
Line Rate & Code 2,048 Kbps ± 50 ppm; Line Code: HDB3
Impedance Options 75 Ω (unbalanced coaxial) / 120 Ω (balanced twisted-pair)
Jitter Tolerance Compliant with ITU-T G.742 and G.823 recommendations
Allowed Input Attenuation 0 to -6 dBm

◆ Serial Data Interfaces (4 × RS232 / RS422 / RS485)

Interface Standards EIA/TIA-232 RS-232 (ITU-T V.28); EIA/TIA-422 RS-422 (ITU-T V.11); EIA/TIA-485 RS-485 (ISO/IEC 8284)
Data Rate & Mode Asynchronous adaptive 0 to 57.6 Kbps (57,600 bps) per channel; Used in point-to-point pairs
RS-232 Signal Pins RXD, TXD, Signal Ground (plus flow control CD, DSR, CTS)
RS-422 Signal Pins TXD+, TXD-, RXD+, RXD-, Signal Ground
RS-485 Signal Pins 4-Wire: TXD+, TXD-, RXD+, RXD-, Signal Ground  |  2-Wire: Data+ (TX+), Data- (TX-), Signal Ground
Surge Protection IEC 61000-4-5 (8/20 μs): Differential Mode 6 kV (2 Ω), Common Mode 6 kV (2 Ω)

◆ Working Environment

Operating Temperature -10°C to +50°C
Operating Humidity 5% to 95% (Non-condensing)
Storage Temperature -40°C to +80°C
Storage Humidity 5% to 95% (Non-condensing)

Specifications

Model Number KDS-E1D4 (RS232) / KDS-E1R4 (RS485) / KDS-E1Q4 (RS422)
Product Name 4-Port Serial (RS232 / RS422 / RS485) to E1 Converter (Desktop)
Functional Description 4-channel asynchronous RS232, RS422, or RS485 (optional by model) to 1-port E1 TDM multiplexer (used in pairs), supporting up to 57.6 Kbps per port and built-in 2M BERT
Port Configuration 1 × E1 interface (75 Ω / 120 Ω), 4 × Serial data interfaces (RS232 / RS485 / RS422)
Power Input & Consumption Power Supply Options: AC 180V–260V / DC -48V / DC +24V / DC 30V / DC 110V (DC polarity-free)  |  Power Consumption: ≤ 10W
Chassis & Dimensions Desktop Enclosure, 216 mm × 140 mm × 31 mm (W × D × H)
Weight 1.2 kg / unit

Application

Interested in this product? Submit your inquiry below for a prompt response.

Scroll to Top