Product Categories

V.24 over IP Converter

Overview

The V.24 over IP Converter (Model: KDS-V.24) is a carrier-grade circuit emulation gateway designed to transparently transport synchronous and asynchronous V.24 serial data streams over standard packet-switched IP networks (LAN, WAN, MAN, and wireless backhauls). It allows telecom carriers and enterprise users to seamlessly connect legacy TDM/serial equipment across cost-effective Ethernet/IP infrastructures without compromising transmission quality or signal timing.

Equipped with advanced clock recovery technology, the device effectively overcomes packet delay variation (PDV), jitter, and packet loss inherent in Ethernet networks to accurately reconstruct V.24 serial bitstream timing at the network exit. Featuring 1 V.24 port, 2 Fast Ethernet electrical ports, 1 100M SFP optical port, and dual Console/Web management interfaces, the KDS-V.24 supports both point-to-point and point-to-multipoint topology deployments.

Features

  • High Transmission Efficiency & Low Delay: Delivers high transmission efficiency with minimal propagation delay across IP networks.
  • Rich Interface Density: Features 1 × V.24 channel, 2 × 10/100Base-TX Ethernet ports, and 1 × 100Base-FX optical port.
  • Configurable Packet Formatting: Supports configurable Ethernet packet lengths and Jumbo Frame transmission.
  • Flexible Protocol Encapsulation: Allows user selection between standard IP protocol encapsulation and raw Ethernet frame encapsulation.
  • VLAN Network Tagging: Full support for IEEE 802.1Q VLAN configuration.
  • Integrated Diagnostic Tools: Supports Ethernet Ping utility for rapid end-to-end network reachability verification.
  • Link Loss Indication (LLI): Features dedicated V.35/V.24 line packet loss indication to notify status instantly.
  • Multi-Mode Loopback Diagnostics: Provides 3 loopback modes: Ethernet local loopback (ANA), V.24 local loopback (DIG), and remote V.24 loopback (REM).
  • Built-In Bit Error Rate Tester: Includes a pseudo-random code test function, allowing the device to act as a 2M BER tester for line commissioning.
  • Hot-Swappable DTE/DCE Support: 24 interface supports hot-swapping and seamless interconnection with both DTE and DCE devices.
  • Versatile Clock Synchronization: Provides 3 selectable clock modes: Internal clock, External clock, and Line (slave) clock.
  • Flexible Network Topologies: Supports both point-to-point and point-to-multipoint connection architectures to satisfy diverse application scenarios.
  • Maximized Bandwidth Efficiency: Optimizes packet transmission to achieve up to 90% bandwidth utilization.
  • Auto-Negotiating Ethernet Ports: 10/100M Ethernet ports support full/half-duplex auto-negotiation and Auto-MDIX.
  • Advanced Adaptive Clock Recovery: Accurately restores original bitstream timing with minimal jitter and wander, in full compliance with ITU-T synchronization standards.
  • Centralized Web & Management Support: Supports Web GUI management and online software upgrades, allowing central host monitoring of remote machine operating status.

Parameters

◆ Ethernet Interface (10/100M)

Protocols & Standards IEEE 802.3az, IEEE 802.1Q (VLAN)
Interface Rate 10/100 Mbps adaptive, full/half-duplex auto-negotiation
MAC Address Table Capacity 4,096 MAC address entries with auto-learning
Physical Connectors 2 × RJ45 electrical ports supporting Auto-MDIX
Optical Interface 1 × 100Base-FX SFP optical port

◆ V.24 Interface

Interface Standard Compatible with ITU-T V.24 specifications
Transmission Rate Synchronous: 64 Kbps / 128 Kbps  |  Asynchronous: 0 to 115.2 Kbps
Physical Connector DB25 female connector
Operating Mode DCE mode
Clock Options G.703 recovered clock, Internal clock, External clock, Slave clock

◆ Environmental Indicators

Operating Temperature -10°C to +60°C
Storage Temperature -40°C to +85°C
Working Humidity 0% to 95% (Non-condensing)
MTBF > 100,000 Hours

Specifications

Model Number KDS-V.24
Product Name V.24 over IP Converter (Desktop)
Functional Description Encapsulates and transmits 1 × V.24 serial channel over Ethernet/IP networks; supports Web GUI and Console CLI management
Port Configuration 1 × V.24 port, 2 × 10/100Base-TX Ethernet ports, 1 × 100Base-FX SFP optical port, 1 × Console management interface
Power Input & Consumption Power Supply Options: AC 180V–260V / DC -48V / DC +24V  |  Power Consumption: ≤ 10W
Dimensions Desktop Enclosure, 216 mm × 130 mm × 31 mm (L × W × H)
Weight 0.85 kg / pc

Application

v.24 over ip converter topology

Interested in this product? Submit your inquiry below for a prompt response.

Scroll to Top