Overview
The V.35 over IP Converter (Model: KDS-V.35) is a carrier-grade circuit emulation device engineered to transparently transport legacy V.35 serial data streams over standard packet-switched IP networks (LAN, WAN, MAN, and wireless backhauls). It enables telecom operators and enterprise users to seamlessly interconnect traditional serial data equipment and user Ethernet infrastructures without compromising signal integrity or timing synchronization.
Equipped with 1 V.35 serial interface, 2 Fast Ethernet 100Mbps electrical ports, 1 Fast Ethernet 100Mbps SFP optical port, and a Console management interface, the KDS-V.35 delivers low-latency transmission, high bandwidth utilization, and high reliability for modern serial-to-IP network migrations.
Features
- Flexible Management Interfaces: Provides intuitive Console (CLI) and Web-based management interfaces for simplified configuration and monitoring.
- Comprehensive Interface Configuration: Features 1 × V.35 serial port, 2 × 10/100Base-TX Ethernet ports, and 1 × 100Base-FX SFP optical port.
- Standard-Compliant V.35 Emulation: Transparently transports V.35 serial data streams over IP packet networks in strict compliance with relevant ITU-T V.35 standards.
- Advanced Clock Recovery Architecture: Employs unique clock recovery algorithm technology to ensure stable frequency restoration with ultra-low jitter and wander.
- Multi-Mode Diagnostic Loopback: Supports 3 comprehensive loopback test functions: Ethernet local loopback (ANA), V.35 local loopback (DIG), and remote V.35 loopback (REM).
- Built-In Error Testing Utility: Equipped with a pseudo-random code testing function, allowing it to function easily as a 2M error tester for rapid line commissioning.
- Hot-Swappable & Universal Compatibility: 35 interface supports hot-swapping and seamless interconnection with both DTE and DCE equipment modes.
- Flexible Clock Source Options: 35 interface supports internal clock, external clock, and line clock synchronization during operation.
- High Efficiency & Low Latency: Optimizes packet transmission overhead with configurable Ethernet packet lengths, Jumbo Frame support, and IEEE 802.1Q VLAN configuration.
- Link Loss Indication (LLI): Features dedicated V.35 link loss indication to provide immediate status alerts for network drops.
- Maximized Bandwidth Utilization: Achieves up to 90% bandwidth utilization efficiency across IP networks.
- Remote Firmware Management: Supports online software and hardware upgrades for both local and remote devices via the Web management interface.
- Versatile Power Supply Options: Multiple flexible power supply options available, including AC 220V, DC -48V, and DC +24V.
Parameters
◆ Ethernet Interface (10/100M)
| Protocols & Standards | IEEE 802.3az, IEEE 802.1Q (VLAN) |
| Interface Rate | 10/100 Mbps adaptive, full/half-duplex auto-negotiation |
| MAC Address Table Capacity | 4,096 MAC address entries with auto-learning |
| Physical Interface | RJ45 electrical port supporting Auto-MDIX |
◆ V.35 Interface
| Interface Standard | Compatible with ITU-T V.35 specifications |
| Interface Rate | 2048 Kbps |
| Physical Connector | DB25 female connector |
| Operation Mode | DCE mode |
| Clock Types | G.703 recovered clock, Internal clock |
◆ Environmental Indicators
| Operating Temperature | -10°C to +60°C |
| Storage Temperature | -40°C to +85°C |
| Working Humidity | 0% to 95% (Non-condensing) |
| MTBF | > 100,000 Hours |
Specifications
| Model Number | KDS-V.35 |
| Product Name | V.35 over IP Converter (Desktop) |
| Functional Description | Encapsulates and transmits 1 × V.35 serial data stream over Ethernet/IP networks; supports Console CLI and Web GUI network management |
| Port Configuration | 1 × V.35 port, 2 × 10/100Base-TX Ethernet ports, 1 × 100Base-FX SFP optical port, 1 × Console management interface |
| Power Input & Consumption | Power Supply Options: AC 180V–260V / DC -48V / DC +24V | Power Consumption: ≤ 10W |
| Dimensions | Desktop Enclosure, 216 mm × 130 mm × 31 mm (L × W × H) |
| Weight | 0.85 kg / pc |
Application


