Product Categories

4E1 TDM over IP Converter (Desktop)

Overview

The 4E1 TDM over IP Converter (Desktop) is designed to transmit legacy E1 signals transparently over standard wired or wireless IP/Ethernet networks. Housed in a compact, rugged IP40-rated anodized aluminum desktop enclosure, it allows operators and enterprises to interconnect traditional TDM equipment—such as PBX systems, mobile base stations, SS7 signaling devices, and voicemail systems—over cost-effective packet networks without sacrificing voice quality or timing synchronization. Equipped with 4 E1 service ports, 2 Gigabit Ethernet ports, 1 Gigabit SFP optical port, and dual management interfaces (Console CLI and Web GUI), it delivers high bandwidth utilization, low transmission latency, and carrier-grade reliability.

Features

  • High-Performance ARM Cortex-M4 Architecture: Powered by an advanced ARM Cortex-M4 processor operating at a primary frequency of 192 MHz for reliable packet processing.
  • Rugged Industrial Enclosure: Encased in an anodized aluminum alloy shell with IP40 protection grade, built to withstand harsh environmental conditions.
  • Flexible Interface Configuration: Provides 4 E1 interfaces, 2 Gigabit (10/100/1000M) Ethernet ports, and 1 Gigabit SFP optical port.
  • Automatic E1 Impedance Matching: Supports both 75 Ω (unbalanced) and 120 Ω (balanced) E1 impedances natively without requiring manual hardware jumpers or settings.
  • Transparent E1 Transmission over IP: Capable of transmitting both framed and unframed E1 (N*64K) signals transparently across IP networks in compliance with ITU-T G.703 standards.
  • Advanced Clock Recovery Technology: Employs a unique clock recovery algorithm to ensure stable frequency restoration with minimal jitter and drift, fully complying with G.823/G.824 and G.8261 specifications.
  • High Efficiency & Low Latency: Achieves up to 90% bandwidth utilization efficiency with configurable Ethernet packet lengths and jumbo frame support.
  • Comprehensive Management (Console & Web GUI): Supports both Console (CLI) and Web-based management interfaces for straightforward installation, activation, and online software/hardware upgrades.
  • Diagnostic Loopback & Alarm Monitoring: Supports local and remote E1 loopback functions, local E1 enablement settings, and E1 link loss indication.
  • Flexible Power Supply Options: Supports multiple power supply modes including AC 220V, DC -48V, and DC +24V.

Parameters

◆ Ethernet Interface (10/100/1000M)

Protocols & Standards IEEE 802.3az, IEEE 802.1Q (VLAN), Jumbo Frames supported
Interface Rate 10/100/1000 Mbps adaptive, full/half duplex fully adaptive
MAC Address Table Capacity 4096 MAC addresses
Physical Connector RJ45 electrical port supporting auto-MDIX
Optical Port 1 × 100/1000M adaptive Ethernet SFP optical port

◆ E1 Interface

Interface Standard Compliant with ITU-T G.703 recommendations
Interface Rate 2048 Kbps ± 50ppm
Line Code HDB3
E1 Impedance 75 Ω (unbalanced) / 120 Ω (balanced)
Jitter Performance Compliant with G.742 and G.823 recommendations
Input Port Attenuation Allowed 0 ~ 6 dBm

◆ Management & Processing

Processor ARM Cortex-M4 processor (192 MHz primary frequency)
Management Interfaces Console CLI port & Web-based management GUI
System Upgrades Online software and hardware upgrades supported via Web interface

◆ Environmental & Mechanical Indicators

Operating Temperature -10°C ~ +60°C
Storage Temperature -40°C ~ +85°C
Working Humidity 0% ~ 95% (non-condensing)
Enclosure & Protection Anodized aluminum alloy shell, IP40 protection grade
MTBF > 100,000 hours

Specifications

Model Number KDS-E4
Product Name 4E1 TDM over IP Converter (Desktop)
Functional Description TDMoIP encapsulation device for transmitting 4 E1 interfaces over IP/Ethernet networks with Web and Console network management
Port Description • 4 × E1 Interface (75 Ω / 120 Ω) • 2 × 10/100/1000M Ethernet Ports • 1 × 100/1000M SFP Optical Port • 1 × Console Management Port (CLI) • 1 × Web Management Interface
Power Supply Power Input: AC 180V ~ 260V / DC -48V / DC +24V  Power Consumption: ≤ 10 W
Dimensions Desktop Enclosure, 216 × 130 × 31 mm (L × W × H)
Weight 0.85 kg

Application

4e1 tdm over ip converter (desktop) application

Interested in this product? Submit your inquiry below for a prompt response.

Scroll to Top