Product Categories

8E1 PDH Optical Multiplexer with 4FE (Physical Isolation)

Overview

The 8E1 PDH Optical Multiplexer with 4FE (Physical Isolation) is a carrier-grade point-to-point optical transmission device engineered on proprietary VLSI ASIC architecture. Designed in a standard 19-inch 1U rack-mount enclosure, it transmits 1 to 8 E1 channels, 4 physically isolated 10/100M Fast Ethernet ports (providing 4 × 100M independent wire-speed bandwidth), 2 auxiliary expansion channels (RS232/RS485/RS422 data), an RS232 Console port, an SNMP Ethernet management interface, and an optional engineering order-wire telephone hotline over dual 1+1 optical backup links (APS). It offers complete physical security between Ethernet channels, low power consumption, and high operational stability.

Features

  • Proprietary ASIC Architecture: Engineered on self-copyright IC technology for maximum stability, high integration, and low power consumption.
  • 4 Physically Isolated Fast Ethernet Ports: Provides 4 physically isolated 10/100M Fast Ethernet ports, each delivering an independent 100M wire-speed channel (total bandwidth 4 × 100M) for absolute network security.
  • 1+1 Optical Protection (APS) & Dual Link Redundancy: Equipped with primary and backup optical interfaces supporting 1+1 Automatic Protection Switching (APS) to guarantee uninterrupted data transmission.
  • Jumbo Frame Transmission Support: Ethernet ports support jumbo frames up to 10240 bytes to ensure efficient high-throughput packet handling.
  • Auxiliary Data Channels: Offers 2 expansion interfaces configurable for RS232, RS485, or RS422 asynchronous data transmission.
  • E1 Compliance & Smooth Clock Recovery: Supports 1 to 8 E1 interfaces strictly complying with ITU-T G.703, utilizing digital clock recovery and smooth phase-locked loop (PLL) technology.
  • Comprehensive Management (Console & SNMP): Provides an RS232 Console port for local command-line management and a built-in SNMP agent for centralized remote network management.
  • Engineering Order-Wire Telephone Hotline: Supports an optional standard 2-wire telephone set (non-telephone handles) for engineering order-wire communication.
  • Diagnostic Loopback & Line Monitoring: Supports remote interface loopback, local E1 loopback, and real-time E1 LOS and AIS alarm detection for simplified line maintenance.
  • Optical Signal Loss Alarm & Remote Power-Off Detection: Detects remote equipment power failure or fiber disconnection upon optical LOS alarm and indicates status via front-panel LEDs.
  • Extended Relay-Free Reach: Relay-free transmission distance spans from 2 km up to 100 km.
  • Flexible Power Inputs & Polarity-Free: Supports AC 220V, DC -48V, or DC +24V power input options; DC power inputs feature automatic polarity detection (Polarity-Free).

Parameters

◆ Optical Interface

Optical Configuration Dual Optical Ports (Primary & Backup 1+1 Protection / APS)
Detector Type Modular Wide Dynamic Range Optical Receiver
Multi-Mode Fiber Specifications • Fiber Core: 50/125µm, 62.5/125µm
• Max Transmission Distance: 5 km @ 62.5/125µm single-mode fiber (Attenuation: 3dBm/km)
• Wavelength: 820nm
• Transmitting Power: -12dBm (Min) ~ -9dBm (Max)
• Receiver Sensitivity: -28dBm (Min)
• Link Budget: 16dBm
Single-Mode Fiber Specifications • Fiber Core: 8/125µm, 9/125µm
• Max Transmission Distance: 40 km @ 9/125µm single-mode fiber (Attenuation: 0.35dBm/km)
• Transmission Reach: 2 km ~ 100 km
• Wavelength: 1310nm / 1550nm
• Transmitting Power: -9dBm (Min) ~ -8dBm (Max)
• Receiver Sensitivity: -27dBm (Min)
• Link Budget: 18dBm

◆ E1 Interface

Interface Standard Complies with protocol ITU-T G.703
Interface Rate 2048 Kbps ± 50ppm
Line Code HDB3
E1 Impedance 75 Ω (unbalanced), 120 Ω (balanced)
Jitter Tolerance In accordance with protocol G.742 and G.823
Allowed Attenuation 0 ~ 6 dBm

◆ Ethernet Interface (10/100M Physical Isolation)

Electrical FE Ports 4 × 10/100 Mbps Fast Ethernet Ports (Physical Isolation)
Channel Bandwidth Independent 100M Wire-Speed per port (Total Bandwidth: 4 × 100M)
Interface Standard Compatible with IEEE 802.3, IEEE 802.1Q (VLAN)
Packet Frame Support Supports Jumbo Frames up to 10240 Bytes
MAC Address Capability 4096 MAC Addresses per independent channel
Connector RJ45 (Electrical, Auto-MDIX)

◆ Auxiliary Data & Management

Expansion Interfaces 2 Auxiliary Channels for RS232 / RS485 / RS422 Asynchronous Data
Order-Wire Phone 1 Engineering Order-Wire Phone Interface (Optional standard 2-wire hotline)
Management Interface 1 × RS232 Console Interface, 1 × SNMP Ethernet Management Port

◆ Working Environment

Working Temperature -10°C ~ 50°C
Working Humidity 5% ~ 95% (non-condensing)
Storage Temperature -40°C ~ 80°C
Storage Humidity 5% ~ 95% (non-condensing)

Specifications

Model Number KDSP-E8WF4
Functional Description 8E1 PDH Optical Multiplexer with 4 Physically Isolated Fast Ethernet Ports (Total Bandwidth 4 × 100M), 1+1 Fiber Protection, 19-inch 1U Rack-mount, Console/SNMP Management, Order-Wire Hotline
Port Description • 1+1 Dual Optical Ports
• 8 E1 Interfaces (75 Ω / 120 Ω)
• 4 Physically Isolated Fast Ethernet Interfaces (4 × 100M)
• 2 Expansion Data Ports (RS232/RS485/RS422)
• 1 RS232 Console Interface
• 1 SNMP Ethernet Management Interface
• 1 Engineering Order-Wire Telephone Interface
Power Power Supply: AC 180V ~ 260V / DC -48V / DC +24V (Polarity-Free)
Power Consumption: ≤ 10 W
Dimensions 19-inch 1U, 483 × 138 × 45 mm (W × D × H)
Weight 3.0 kg

Application

8e1 pdh optical multiplexer with 4fe (physical isolation)

 

Interested in this product? Submit your inquiry below for a prompt response.

Scroll to Top