Product Categories

16E1 PDH Optical Multiplexer with 8FE (1+1 Protection)

Overview

The 16E1 PDH Optical Multiplexer with 8FE (1+1 Protection) is a high-density managed point-to-point optical transmission device designed on proprietary VLSI ASIC architecture. Housed in a standard 19-inch 1U rack-mount chassis, it integrates 1 to 16 E1 interfaces, 8 switched 10/100M Fast Ethernet ports (supporting IEEE 802.1Q VLAN division), 1 auxiliary expansion channel (RS232/RS485/RS422 data), a local Console management port, an SNMP management interface, and an engineering order-wire telephone hotline over a dual-fiber 1+1 optical protection link (APS). It offers exceptional transmission stability, low power consumption, and robust carrier-grade link redundancy.

Features

  • Proprietary ASIC Architecture: Engineered on self-copyright IC technology for high reliability, compact integration, and low power consumption.
  • 1+1 Optical Protection (APS) & ALS Function: Features dual optical interfaces supporting Automatic Protection Switching (APS) for full optical redundancy, along with Automatic Laser Shutdown/Reduction (ALS) for operational safety.
  • 8 Switched Fast Ethernet Ports: Equipped with 8 Fast Ethernet (10/100M) switch ports supporting IEEE 802.1Q VLAN division, jumbo frames up to 1916 bytes, independent port settings, and bandwidth control in multiples of 32K.
  • Auxiliary Expansion Channel: Provides 1 expansion interface for RS232, RS485, or RS422 asynchronous data transmission.
  • E1 Compliance & Smooth Clock Recovery: Supports 1 to 16 E1 interfaces complying strictly with ITU-T G.703, featuring digital clock recovery and smooth phase-locked loop (PLL) technology.
  • Comprehensive Network Management (Console & SNMP): Provides an RS232 Console interface for local management and a built-in SNMP agent for remote network monitoring.
  • Engineering Order-Wire Telephone Hotline: Supports an optional standard 2-wire telephone set (non-telephone handles) as an engineering order-wire hotline channel.
  • Diagnostic Loopback & Alarm Monitoring: Supports remote interface loopback, local E1 loopback, and real-time E1 LOS and AIS alarm detection for simplified line maintenance.
  • Optical Signal Loss Alarm & Remote Power-Off Detection: Detects remote equipment power outages or optical link disconnections upon LOS alarm, displaying real-time LED alarm status.
  • Extended Relay-Free Reach: Relay-free optical transmission distance ranges up to 2 km ~ 120 km.
  • Flexible Power Supply Options & Polarity-Free: Supports AC 220V, DC -48V, or DC +24V power input; DC power input features automatic polarity detection (Polarity-Free).

Parameters

◆ Optical Interface

Optical Configuration Dual Optical Ports (1+1 Protection / APS with ALS Function)
Detector Type Modular Wide Dynamic Range Optical Receiver
Multi-Mode Fiber Specifications • Fiber Core: 50/125µm, 62.5/125µm
• Max Transmission Distance: 5 km @ 62.5/125µm single-mode fiber (Attenuation: 3dBm/km)
• Wavelength: 820nm
• Transmitting Power: -12dBm (Min) ~ -9dBm (Max)
• Receiver Sensitivity: -28dBm (Min)
• Link Budget: 16dBm
Single-Mode Fiber Specifications • Fiber Core: 8/125µm, 9/125µm
• Max Transmission Distance: 40 km @ 9/125µm single-mode fiber (Attenuation: 0.35dBm/km)
• Transmission Reach: 20 km ~ 120 km
• Wavelength: 1310nm / 1550nm
• Transmitting Power: -9dBm (Min) ~ -8dBm (Max)
• Receiver Sensitivity: -27dBm (Min)
• Link Budget: 18dBm

◆ E1 Interface

Interface Standard Complies with protocol ITU-T G.703
Interface Rate 2048 Kbps ± 50ppm
Line Code HDB3
E1 Impedance 75 Ω (unbalanced), 120 Ω (balanced)
Jitter Tolerance In accordance with protocol G.742 and G.823
Allowed Attenuation 0 ~ 6 dBm

◆ Ethernet Interface (10/100M)

Electrical FE Ports 8 × 10/100 Mbps Fast Ethernet Ports, half/full duplex auto-negotiation
Interface Standard Compatible with IEEE 802.3, IEEE 802.1Q (VLAN)
Packet & Bandwidth Control Supports max frame size 1916 bytes; Bandwidth adjustable in multiples of 32K
MAC Address Capability 4096 MAC Addresses
Connector RJ45 (Electrical, Auto-MDIX)

◆ Auxiliary Data & Management

Expansion Interface 1 Auxiliary Channel for RS232 / RS485 / RS422 Asynchronous Data
Order-Wire Phone 1 Engineering Order-Wire Phone Interface (Optional standard 2-wire hotline)
Management Interface 1 × RS232 Console Interface, 1 × SNMP Ethernet Management Port

◆ Working Environment

Working Temperature -10°C ~ 50°C
Working Humidity 5% ~ 95% (non-condensing)
Storage Temperature -40°C ~ 80°C
Storage Humidity 5% ~ 95% (non-condensing)

Specifications

Model Number KDSP-E16F8
Functional Description 16E1 + 8FE PDH Multiplexer with 1+1 Fiber Protection, 19-inch 1U Rack-mount, Console/SNMP Management, Order-Wire Hotline
Port Description • 1+1 Dual Optical Ports
• 16 E1 Interfaces (75 Ω / 120 Ω)
• 8 Fast Ethernet Interfaces (10/100M Switch Ports)
• 1 Expansion Data Port (RS232/RS485/RS422)
• 1 RS232 Console Interface
• 1 SNMP Ethernet Management Interface
• 1 Engineering Order-Wire Telephone Interface
Power Power Supply: AC 180V ~ 260V / DC -48V / DC +24V (Polarity-Free)
Power Consumption: ≤ 10 W
Dimensions 19-inch 1U, 483 × 138 × 45 mm (W × D × H)
Weight 3.0 kg

Application

16e1 pdh optical multiplexer with 8fe (1+1 protection) application

Interested in this product? Submit your inquiry below for a prompt response.

Scroll to Top