Product Categories

8E1 PDH Optical Multiplexer with 4FE (CLI & SNMP Managed)

Overview

The 8E1 PDH Optical Multiplexer with 4FE (CLI & SNMP Managed) is a managed point-to-point optical transmission device built on proprietary VLSI ASIC architecture. Housed in a standard 19-inch 1U rack-mount chassis, it transmits 8 E1 interfaces, 4 wire-speed 10/100M Fast Ethernet switch ports (supporting IEEE 802.1Q VLAN division), and 2 expansion interfaces for asynchronous data channels (RS232/RS485/RS422) over a single optical link. Equipped with comprehensive network management capabilities supporting local CLI (Console) and optional remote SNMP management, an optional engineering order-wire telephone hotline, low power consumption, and flexible AC/DC power options, it delivers exceptionally reliable performance for enterprise and telecom infrastructure.

Features

  • Proprietary ASIC Architecture: Engineered on self-copyright IC technology for maximum system reliability, compact integration, and low power consumption.
  • Modular Wide Dynamic Optical Receiver: Features a modular wide dynamic range optical detector, ensuring superior optical line sensitivity and link stability.
  • Auto-Negotiating Switched Fast Ethernet: 4-port Fast Ethernet switch interface supports 10/100M auto-negotiation, half/full duplex modes, 100M wire-speed throughput, and IEEE 802.1Q VLAN tag management.
  • E1 Compliance & Smooth Clock Recovery: 8 E1 interfaces strictly comply with ITU-T G.703 and incorporate digital clock recovery and smooth phase-locked loop (PLL) technology.
  • Comprehensive Network Management (CLI & SNMP): Supports local CLI Console management and optional SNMP network management for centralized remote monitoring and configuration.
  • Engineering Order-Wire Telephone Hotline: Supports standard 2-wire telephone set (non-telephone handles) as an optional engineering order-wire hotline channel.
  • 2 Versatile Expansion Data Slots: Provides 2 expansion slots configured for RS232, RS485, or RS422 asynchronous data transmission.
  • Optical Signal Loss Alarm & Remote Detection: Detects remote equipment power loss or optical fiber disconnection upon LOS alarm, indicating status in real time via front-panel LED indicators.
  • Remote Status Monitoring: Allows real-time monitoring and reporting of remote equipment operational status from the local terminal.
  • Remote Loopback Command Diagnostics: Supports remote interface loopback commands to simplify field troubleshooting and line maintenance.
  • Extended Relay-Free Reach: Relay-free optical transmission distance ranges up to 2 km ~ 120 km.
  • Flexible AC/DC Power Supply Options & Polarity-Free: Supports AC 220V, DC -48V, or DC +24V power input; DC power input features automatic polarity detection (Polarity-Free).

Parameters

◆ Optical Interface

Optical Configuration Single Optical Port (1* FC/SC/ST Fiber Port)
Detector Type Modular Wide Dynamic Range Optical Receiver
Multi-Mode Fiber Specifications • Fiber Core: 50/125µm, 62.5/125µm
• Max Transmission Distance: 5 km @ 62.5/125µm single-mode fiber (Attenuation: 3dBm/km)
• Wavelength: 820nm
• Transmitting Power: -12dBm (Min) ~ -9dBm (Max)
• Receiver Sensitivity: -28dBm (Min)
• Link Budget: 16dBm
Single-Mode Fiber Specifications • Fiber Core: 8/125µm, 9/125µm
• Max Transmission Distance: 40 km @ 9/125µm single-mode fiber (Attenuation: 0.35dBm/km)
• Transmission Reach: 20 km ~ 120 km
• Wavelength: 1310nm / 1550nm
• Transmitting Power: -9dBm (Min) ~ -8dBm (Max)
• Receiver Sensitivity: -27dBm (Min)
• Link Budget: 18dBm

◆ E1 Interface

Interface Standard Complies with protocol ITU-T G.703
Interface Rate N × 64Kbps ± 50ppm
Line Code HDB3
E1 Impedance 75 Ω (unbalanced), 120 Ω (balanced)
Jitter Tolerance In accordance with protocol G.742 and G.823
Allowed Attenuation 0 ~ 6 dBm

◆ Fast Ethernet Interface (10/100M Switched)

Interface Rate 10/100 Mbps, half/full duplex auto-negotiation (100M wire speed)
Interface Standard Compatible with IEEE 802.3, IEEE 802.1Q (VLAN)
MAC Address Capability 4096 MAC Addresses
Connector RJ45, supports Auto-MDIX

◆ Expansion Interfaces & Management

Expansion Slots 2 Slots, supporting RS232 / RS485 / RS422 asynchronous data transmission
Order-Wire Phone 1 Engineering Order-Wire Phone Interface (Optional standard 2-wire hotline)
Management Interface 1 × RS232 Console (CLI) Interface, SNMP Network Management (Optional)

◆ Working Environment

Working Temperature -10°C ~ 50°C
Working Humidity 5% ~ 95% (non-condensing)
Storage Temperature -40°C ~ 80°C
Storage Humidity 5% ~ 95% (non-condensing)

Specifications

Model Number KDSP-E8F4
Functional Description 8E1 + 4FE PDH Optical Multiplexer with CLI & SNMP Management, 19-inch 1U Rack-mount, Order-Wire Telephone Interface
Port Description • 1 Optical Port
• 8 E1 Interfaces (75 Ω / 120 Ω)
• 4 Fast Ethernet Interfaces (10/100M Switch Ports)
• 1 RS232 Console (CLI) Interface (SNMP Optional)
• 1 Engineering Order-Wire Telephone Interface
• 2 Expansion Asynchronous Data Interfaces (RS232/485/422)
Power Power Supply: AC 180V ~ 260V / DC -48V / DC +24V (Polarity-Free)
Power Consumption: ≤ 10 W
Dimensions 19-inch 1U, 483 × 138 × 45 mm (W × D × H)
Weight 2.5 kg

Application

8e1 pdh optical multiplexer with 4fe application

Interested in this product? Submit your inquiry below for a prompt response.

Scroll to Top