Overview
This product is a point-to-point optical transmission device developed on the basis of PDH special VLSI for optical fiber transmission. Housed in a standard 19-inch 1U rack-mount enclosure, it provides 16 E1 interfaces, 1 digital business order-wire phone channel, 12 wire-speed 10/100M Fast Ethernet switch ports (supporting IEEE 802.1Q VLAN division), and 8 independent POTS voice telephone channels (FXO/FXS). Equipped with dual optical ports for 1+1 Automatic Protection Switching (APS), Automatic Laser Shutdown/Reduction (ALS), RS232 Console management, and network management monitoring, it provides stable and reliable operation, low power consumption, high integration, and compact size for enterprise and carrier networks.
Features
- Independent Intellectual Property ASIC: Integrated circuit based on independent intellectual property rights.
- Dual Optical Port 1+1 APS & ALS Protection: Provides 2 optical interfaces with dual optical port 1+1 protection (APS) and ALS (Automatic Laser Shutdown/Reduction) functions: after detecting optical fiber interruption in the optical path, the optical transmitter output power is automatically disabled and will automatically return to normal state once the optical fiber is recovered.
- 12-Port Switched Ethernet with VLAN Isolation: Ethernet interface rate is 10/100M with full duplex / half duplex adaptive capability. The 12-channel network acts as switch ports supporting IEEE 802.1Q VLAN division, which can be configured as 12-channel logical isolation.
- E1 ITU-T G.703 Compliance & PLL Recovery: 16 E1 interfaces strictly comply with ITU-T G.703 recommendation and adopt full digital clock recovery and smooth phase-locked loop (PLL) technology.
- Optical Signal Loss Alarm Detection: When the optical signal is lost, it can detect whether the remote equipment is powered down or the optical fiber is disconnected, and indicate the alarm through LED indicators.
- Remote Operating Status Monitoring: Provides the function of viewing and displaying the working status of remote equipment at the local end.
- Integrated 8-Channel Voice Interface (FXO/FXS): Supports 8-channel voice telephone ports; FXO ports connect with SPC exchanges (PBX/PSTN), and FXS ports connect directly with user telephone sets.
- 1 Digital Business Order-Wire Phone: Provides 1 digital business order-wire telephone channel for engineering maintenance.
- Comprehensive Remote Loopback Diagnostics: Provides remote interface loopback function for simplified line testing and troubleshooting.
- Dual Management Interfaces (Console & Network Management): Provides a Console management interface (RS232) for easy local installation and commissioning, and a dedicated network management interface (BNC/Ethernet) for network monitoring.
- Long-Distance Relay-Free Transmission: Transmission distance without a relay can reach from 2 km up to 120 km.
- Flexible Multiple Power Supply Modes: Supports multiple power supply options including AC 220V, DC -48V, and DC +24V, with support for AC+DC, AC+AC, and DC+DC dual power redundancy backup modes.
- Automatic DC Power Polarity Detection: DC -48V / DC +24V power supply features automatic polarity detection, eliminating the need to distinguish positive and negative poles during installation.
- High Reliability & Integration: Designed for stable and reliable operation with low power consumption, high integration, and compact 1U form factor.
Parameters
◆ Optical Interface
| Optical Ports | 2 Ports (Dual Optical 1+1 APS Protection & ALS) |
| Multi-Mode Fiber Specifications | • Fiber Core: 50/125µm, 62.5/125µm • Max Distance: 5km @ 62.5/125µm (Attenuation: 3dBm/km) • Wavelength: 820nm / 850nm • Transmitting Power: -12dBm (Min) ~ -9dBm (Max) • Receiver Sensitivity: -28dBm (Min) • Link Budget: 16dBm |
| Single-Mode Fiber Specifications | • Fiber Core: 8/125µm, 9/125µm • Max Distance: 20km ~ 120km (Attenuation: 0.35dBm/km) • Wavelength: 1310nm / 1550nm • Transmitting Power: -9dBm (Min) ~ -8dBm (Max) • Receiver Sensitivity: -28dBm ~ -40dBm • Link Budget: 18dBm |
◆ E1 Interface
| Interface Standard | Complies with protocol ITU-T G.703 |
| Interface Rate | N × 64Kbps ± 50ppm (2048Kbps) |
| Line Code | HDB3 |
| E1 Impedance | 75 Ω (unbalanced), 120 Ω (balanced) |
| Jitter Tolerance | In accordance with protocol G.742 and G.823 |
| Allowed Attenuation | 0 ~ 6 dBm |
◆ Ethernet Interface (10/100M Switched)
| Interface Rate | 10/100 Mbps, half/full duplex auto-negotiation |
| Interface Standard | Compatible with IEEE 802.3, IEEE 802.1Q (VLAN) |
| VLAN & Logical Isolation | Supports VLAN division and 12-channel logical isolation |
| MAC Address Table | 4096 MAC Addresses |
| Connector | RJ45, supports Auto-MDIX |
◆ Voice Interface (8-Channel FXO / FXS)
| FXS Phone Interface | • Ring Voltage: 75V • Ring Frequency: 25Hz • Two-Line Impedance: 600 Ω (off-hook) • Return Loss: 40 dB |
| FXO Switch Interface | • Ring Detect Voltage: 35V • Ring Detect Frequency: 17Hz ~ 60Hz • Two-Line Impedance: 600 Ω • Return Loss: 40 dB |
◆ Working Environment
| Working Temperature | -10°C ~ 60°C |
| Working Humidity | 5% ~ 95% (non-condensing) |
| Storage Temperature | -40°C ~ 85°C |
| Storage Humidity | 5% ~ 95% (non-condensing) |
Specifications
| Model Number | KDSP-E16F12V8 |
| Functional Description | 16E1 + 12FE + 8-Channel Voice PDH Optical Multiplexer (19-inch 1U Rack-mount), 1+1 Optical Backup, Console & Network Management |
| Port Description | • 2 Optical Ports (1+1 APS) • 16 E1 Interfaces (75 Ω / 120 Ω) • 12 Fast Ethernet Interfaces (10/100M Switch Ports) • 8 Voice Telephone Interfaces (FXO/FXS) • 1 Digital Order-Wire Telephone Interface • 1 RS232 Console Interface • 1 Network Management Interface |
| Power | Power Supply: AC 220V / DC -48V / DC +24V (Optional Power Redundancy: AC+DC, AC+AC, DC+DC) Power Consumption: ≤ 15 W |
| Dimensions | 19-inch 1U, 485 × 200 × 45 mm (W × D × H) |
| Weight | 2.7 kg |
Application


