Product Categories

16E1 PDH Optical Multiplexer with 4FE

Overview

The 16E1 PDH Optical Multiplexer with 4FE is a highly integrated, high-capacity point-to-point optical transmission device housed in a standard 19-inch 1U rack-mount enclosure. Designed for high-density carrier and enterprise access, it provides 1 to 16 E1 interfaces, 4 wire-speed 10/100M Fast Ethernet switch ports with VLAN and bandwidth management, optional 1+1 optical protection switching (APS), and 2 expansion channels for RS232/RS485/RS422 asynchronous data. Equipped with RS232 Console and embedded SNMP network management interfaces, it offers comprehensive remote monitoring, loopback diagnostics, and low-power, robust performance for critical telecom networks.

 Features

  • Proprietary ASIC & Low Power: Engineered with self-developed integrated circuit (IC) technology for high reliability, high integration, and low power consumption.
  • 1+1 Optical Protection (APS) & ALS: Supports dual optical ports for 1+1 Automatic Protection Switching (APS) and Automatic Laser Shutdown/Reduction (ALS).
  • Comprehensive Management (Console & SNMP): Provides an RS232 Console interface for local management and an internal SNMP agent with dedicated Ethernet management port for remote network management.
  • Flexible Ethernet & Bandwidth Control: Equipped with 4 Fast Ethernet ports supporting VLAN (IEEE 802.1Q), jumbo frames up to 1916 bytes, independent port configuration, and granular bandwidth limiting in increments of 32 Kbps.
  • E1 Compliance & PLL Clock Recovery: 16 E1 interfaces strictly comply with ITU-T G.703, utilizing digital clock recovery and smooth phase-locked loop (PLL) technology.
  • Flexible Data Expansion Channels: Provides 2 expansion interfaces designed as transmission channels for RS232, RS485, or RS422 asynchronous data.
  • Engineering Order-Wire Hotline (Optional): Supports a standard 2-wire telephone set (non-telephone handles) as an engineering order-wire hotline for field maintenance.
  • Optical Link Loss & Power Failure Alarm: Detects remote power outage or optical fiber disconnection upon optical loss and provides real-time LED alarm indications.
  • Advanced Line Loopback & Diagnostics: Supports remote interface loopback commands, local E1 loopback, and E1 LOS / AIS alarm detection for simplified troubleshooting.
  • Long-Distance Transmission: Supports relay-free optical transmission distances from 2 km up to 120 km.
  • Polarity-Free Power Supply: Supports optional AC 220V, DC -48V, or DC +24V inputs with automatic DC polarity detection for seamless deployment.

Parameters

◆ Optical Interface

Optical Ports 1 Port or 2 Ports (1+1 APS Protection)
Fiber Type & Connector Single-mode / Multi-mode; FC, SC, ST, or LC (SFP)
Wavelength Multi-mode: 850nm / 1310nm; Single-mode: 1310nm / 1550nm
Transmission Distance Relay-free distance: 20 km ~ 120 km (up to 120 km optional)
Transmitting Power • Single-mode 1310nm / 1550nm: ≥ -9 dBm
• Multi-mode 850nm: -18 dBm
• Multi-mode 1310nm: -25 dBm
Receiver Sensitivity -28 dBm ~ -40 dBm

◆ E1 Interface

Interface Standard Complies with ITU-T G.703
Interface Rate 2048 Kbps ± 50 ppm
Line Code HDB3
E1 Impedance 75 Ω (unbalanced), 120 Ω (balanced)
Jitter Tolerance Complies with ITU-T G.742 and G.823
Allowed Attenuation 0 ~ 6 dBm

◆ Ethernet Interface (10/100M)

Interface Rate 10/100 Mbps, half/full duplex auto-negotiation
Interface Standard Compatible with IEEE 802.3, IEEE 802.1Q (VLAN)
Frame Size & Bandwidth Supports frame size up to 1916 bytes; Bandwidth configurable in N × 32 Kbps increments
MAC Address Capability 4096 MAC Addresses
Connector RJ45, supports Auto-MDIX

◆ Working Environment

Working Temperature -10°C ~ 50°C
Working Humidity 5% ~ 95% (non-condensing)
Storage Temperature -40°C ~ 80°C
Storage Humidity 5% ~ 95% (non-condensing)

Specifications

Model Number FCP-E16F4 [cite: 18]
Functional Description 16E1 + 4FE PDH Optical Multiplexer (19-inch 1U Rack-mount), optional Order-Wire Phone, Console, SNMP, and 1+1 Optical Backup [cite: 18]
Port Description • 1 or 2 Optical Ports (1+1 Protection)
• 16 E1 Interfaces (75 Ω / 120 Ω)
• 4 Fast Ethernet (FE) Interfaces
• 1 RS232 Console Management Port
• 1 SNMP Ethernet Network Management Port
• 2 Expansion Interfaces (RS232/RS485/RS422)
• 1 Engineering Order-Wire Telephone Interface [cite: 18]
Power Power Supply: AC 180V ~ 260V / DC -48V / DC +24V
Power Consumption: ≤ 10 W [cite: 18]
Dimensions 19-inch 1U, 483 × 138 × 45 mm (W × D × H) [cite: 18]
Weight 3.0 kg [cite: 18]

Application

16e1 pdh optical multiplexer with 4fe application

Interested in this product? Submit your inquiry below for a prompt response.

Scroll to Top